CPU power sensor issue.

roddey3080

The power sensor for the cpu sometimes works after boot, but other times after boot the sensor shows 0 and takes a reboot to get it working. The cpu is I7-12700k.

roddey3080

I do not have this happening in other sensor software like aida64, OCCT or Hwinfo.

roddey3080

Just did another cold boot and this time the cpu power sensor works, but now GPU Frequency and GPU volt is showing 0. I will put the Turzx USB monitor away until these things can be fixed and go back to using aida64. The sensors work on that app without these issues.

roddey3080

img-1257.jpg

roddey3080

popeye-chasing-ship.jpg

Here is my aida64 sensor panel and it always works.

roddey3080

Here is a picture showing that the cpu sensor did not work after boot but the gpu frequency and gpu volt are working this time.
Aida64 is working on cpu power and Turzx is not.

img-1259.jpg

roddey3080

roddey3080 That should be cpu power sensor in the above comment. I can't seem to be able edit these post.

SSUPER

You can try switching sensors in Settings

RedCore

I cant get the right CPU power readings. I have in AIDA64 and HWinfo two sensors for cpu power listed. I have "CPU Package" showing 1.17W and i have only "CPU" showing 23.60w your software is using the wrong sensor. i found no way to change it. Would be nice to detect all sensors and let me chose the right one.

Motherboard is: Asus ROG Strix x299-xe Gaming
CPU is: I9-9940x